WILL’S DESIGN LOG

  1. New Portrait 
  2. Playful Communication 
  3. Soft Robotic
  4. Modern Artifact 
  5. Expressive Environment
  6. AR
  7. 2024 FW Archive

zx1900@nyu.edu
xuanzhongao.com

Intro to Physical Computing


Week 1:


Lab: Setting up a Breadborad



Setup.1:
220-ohm resistor: 23A, Voltage Bus
Red Led: 23B, 26B
Black Wire: 26E, Ground Bus
Setup.2:
220-ohm resistor: 23A, Voltage Bus
Red Led: 23J, Ground Bus
(does not work) Setup.3:
220-ohm resistor: 23A, Voltage Bus
Red Wire: 23E, 23F
Red Led: 23J, Ground Bus
Setup.4:
220-ohm resistor: 23A, Voltage Bus
Black Wire: 23J, Ground Bus
Red Led: 23E, 23F
Setup.5:
Black Wire: 32A, Ground Bus
Red Wire: Voltage Bus, 28A
Red Led: 28B, 32B
Blue Led: 28C, 32C
Yellow/Blue Led: 28E, 32E
(Yellow Led blowed up, I suspect it was too small.)

Lab: Electronics



Setup.1
220-ohm resistor: 28A, Voltage Bus, Voltage:1.39
Black Wire: 31B Ground Bus
Red Led: 28 E, 31E, Voltage: 1.82
Setup.2
220-ohm resistor: 27D, 30D
Black Wire: 33D, Ground Bus
Red Wire: 25A, Voltage Bus
Red Led: 30E, 33E
Push Button: 25E, 27E, 25G, 27G
Setup.3
Votlage: 
220-ohm resistor:0.02
Each Led: 1.58
Black and Red Wire: 3.24 total Setup.4
Amp:1.89 Setup.5
Potentiometer: 25C, 27C, 29C

Lab: Switches


Setup.1
Push Button 1: 23E, 23H, 25E, 25H
Push Button 2: 28E, 28H, 30E, 30H
Push Button 3: 33E, 33H, 35E, 35H
Blue Wire1: 23D, 28D
Blue Wire2: 30D, 35D
Blue Wire3: 25C, 30C
Blue Wire: 28B, 33B
Led: 35J, 38J
Black Wire: 38H, Ground Bus
220-ohm resistor: Voltage Bus, 23B

Setup.2
Function: Push different buttons, different led lights up.
Push Button 1: 23E, 23H, 25E, 25H
Push Button 2: 28E, 28H, 30E, 30H
Push Button 3: 33E, 33H, 35E, 35H
Blue Wire1: 23D, 28D
Blue Wire2: 23C, 33C
Led1: 25J, 29J
Led2: 30J, 31J
Led3: 35J, 39J
Black Wire1: 29I, Ground Bus
Black Wire2: 31I, Ground Bus
Black Wire3: 39I, Ground Bus
Setup.3
Red Wire: Voltage Bus, 29A
Button: 29D, 29G, 31D, 31G
Motor: 31B, Ground Bus
Question: the motor for some reason only move a litte at the moment of pressing button. Setup.4
Red Wire: Voltage Bus, 29A
Button: 29D, 29G, 31D, 31G
Motor: 31B, Ground Bus
220-ohm resistor: 31H, 36H
Led: 36I, 38I
Black Wire: 38H, Ground Bus MAKE YOUR OWN SWITCH
Function: use the stick tool to guide you through the maze, and find the red dot. When the stick tool reach the red dot, the led lights up.
Setup:
Red Wire: 27C, Voltage Bus
Led: 37B, Ground Bus
220-ohm resistor: 27D, 30D
Stick tool: 30E
Maze: 37E


©Zhongao XuanWILL’S DESIGN LOGXUAN 2024